Clark School Home

Find us On   Facebook Twitter YouTube Linked In

Getting Here

 

On this page...
Directions for Travel

Driving

From Baltimore

From Annapolis and points east

From within Washington, D.C.

From points south and west of Washington, D.C. and Montgomery County, Md

Metrorail

From within Washington, D.C.

From Ronald Reagan National (DCA) Airport

From the D.C. Bus Station (Greyhound and Trailways)

Local Airports

From the Baltimore-Washington International (BWI) Airport

From the Washington Dulles International (IAD) Airport

From Ronald Reagan National (DCA) Airport

Airport Websites

 

Driving  Driving

From Baltimore:
Take I-95 South to the Capital Beltway (I-495) and follow signs to College Park, US Route 1 South. Proceed approximately two miles south on US Route 1 to the University's Campus Drive entrance. Turn right onto Campus Drive and immediately make another right turn onto Paint Branch Drive. Go straight, and at the second stop sign make a left and then an immediate right into the visitor parking area. After exiting your vehicle, enter the Kim Engineering Building (immediately before the visitor parking lot on Paint Branch Drive). Events are typically held in the first-floor rotunda, boardrooms and lecture hall. The Dean's Office is immediately across from the elevator on the third floor.
Parking | Kim Parking Map

From Annapolis and points east:
Take US Route 50 to the Capital Beltway (I-95/495) and go north on I-95/495 to College Park, US Route 1 South (exit 25). Proceed approximately two miles south on US Route 1 to the University's Campus Drive entrance. Turn right onto Campus Drive and immediately make another right turn onto Paint Branch Drive. Go straight, and at the second stop sign make a left and then an immediate right into the visitor parking area. After exiting your vehicle, enter the Kim Engineering Building (immediately before the visitor parking lot on Paint Branch Drive). Events are typically held in the first-floor rotunda, boardrooms and lecture hall. The Dean's Office is immediately across from the elevator on the third floor.
Parking | Kim Parking Map

From within the city of Washington, D.C.:
Go northeast on Rhode Island Avenue (US Route 1). After entering the state of Maryland, continue on US Route 1 for approximately five miles to College Park. Turn left at the light onto Campus Drive and immediately make another right turn onto Paint Branch Drive. Go straight, and at the second stop sign make a left and then an immediate right into the visitor parking area. After exiting your vehicle, enter the Kim Engineering Building (immediately before the visitor parking lot on Paint Branch Drive). Events are typically held in the first-floor rotunda, boardrooms and lecture hall. The Dean's Office is immediately across from the elevator on the third floor.
Parking | Kim Parking Map

From points south and west of Washington, D.C., and Montgomery County, MD:
Take the Capital Beltway (I-495) and head north and east. Just after I-495 joins I-95 in Maryland above Washington, D.C., get off at exit 25B toward College Park on US Route 1 South. Proceed approximately two miles south on US Route 1 to the University's Campus Drive entrance. Turn right onto Campus Drive and immediately make another right turn onto Paint Branch Drive. Go straight, and at the second stop sign make a left and then an immediate right into the visitor parking area. After exiting your vehicle, enter the Kim Engineering Building (immediately before the visitor parking lot on Paint Branch Drive). Events are typically held in the first-floor rotunda, boardrooms and lecture hall. The Dean's Office is immediately across from the elevator on the third floor.
Parking | Kim Parking Map

MetroRail  Via Metrorail

Metrorail's Web Site and Map

From Washington, D.C .:
Take the Green Line train toward Greenbelt and get off at the College Park/U of MD station. Get on the UM Shuttle bus for the ride to the campus. Get off at the first campus stop, which will be directly in front of the Glenn L. Martin Institute of Technology. Walk back toward the entrance to campus. Turn left onto Paint Branch Drive. At the first stop sign, the Kim Engineering Building will be on your left. Enter through the main doors. Events are typically held in the first-floor rotunda, boardrooms and lecture hall. The Dean's Office is immediately across from the elevator on the third floor.

From the Ronald Reagan National Airport:
Take the Yellow Line train (toward Mt. Vernon Square/UDC) and get off at the Gallery Place/Chinatown station. Then transfer to the Red Line train (toward Wheaton) and get off at the Fort Totten station. Then transfer to the Green Line train (toward Greenbelt) and get off at the College Park/U of MD station. Get on the UM shuttle bus for the free ride to the campus. Get off at the first campus stop, in front of the Glenn L. Martin Institute of Technology. Walk back toward the entrance to campus. Turn left onto Paint Branch Drive . At the first stop sign, the Kim Engineering Building will be on your left. Enter through the main doors. Events are typically held in the first-floor rotunda, boardrooms and lecture hall. The Dean's Office is immediately across from the elevator on the third floor.

From the D.C. Bus Station (serving Greyhound and Trailways):
From the Washington, D.C. bus station (at 1005 First Street N.E.), take Metro Bus 96 to Union Station and get onto the Red Line train (toward Wheaton). Get off at the Fort Totten station. Then transfer to the Green Line train (toward Greenbelt) and get off at the College Park/U of MD station. Get on the UM Shuttle bus for the ride to the campus. Get off at the first campus stop, which will be in front of the Glenn L. Martin Institute of Technology. Walk back toward the entrance to campus. Turn left onto Paint Branch Drive. At the first stop sign, the Kim Engineering Building will be on your left. Enter through the main doors. Events are typically held in the first-floor rotunda, boardrooms and lecture hall. The Dean's Office is immediately across from the elevator on the third floor.

Airports  From Local Airports

From the Baltimore-Washington International (BWI) Airport:
Upon exiting the airport, follow the signs and get onto I-195 West. Follow I-195 West for about 3.5 miles and get onto I-95 South. Follow I-95 South for about 19 miles and follow the signs to Exit 25. Get off at Exit 25B. Go south on U.S. Route 1 for two miles to the University's Campus Drive entrance on your right. Turn right onto Campus Drive and immediately make another right turn onto Paint Branch Drive. Go straight, and at the second stop sign make a left and then an immediate right into the visitor parking area. After exiting your vehicle, enter the Kim Engineering Building (immediately before the visitor parking lot on Paint Branch Drive). Events are typically held in the first-floor rotunda, boardrooms and lecture hall. The Dean's Office is immediately across from the elevator on the third floor.
Parking | Kim Parking Map

From the Washington Dulles International (IAD) Airport:
Upon exiting the airport, follow the Dulles Airport Access Road East for about 13 miles and exit it onto I-495 North. Follow I-495 North for about 18 miles and get off at Exit 25B. Go south on U.S. Route. 1 for two miles to the University's Campus Drive entrance on your right. Turn right onto Campus Drive and immediately make another right turn onto Paint Branch Drive. Go straight, and at the second stop sign make a left and then an immediate right into the visitor parking area. After exiting your vehicle, enter the Kim Engineering Building (immediately before the visitor parking lot on Paint Branch Drive). Events are typically held in the first-floor rotunda, boardrooms and lecture hall. The Dean's Office is immediately across from the elevator on the third floor.

From Ronald Reagan National (DCA) Airport:
Upon exiting the airport to the north (toward Washington, D.C.), get onto the George Washington Memorial Parkway. Within a mile, turn right onto U.S. Route 1/I-395 North (to Washington). Stay in your left lane while crossing the bridge over the Potomac River. (You will follow U.S. Route. 1 through Washington to College Park). After crossing the Potomac and passing the Washington Monument on your left, turn right (east) onto Constitution Avenue. Go eight blocks and turn left (north) onto 6th Street N.W. Go about 1.5 miles and bear right onto Rhode Island Avenue. Then go 7.5 miles to College Park and turn left at the University's Campus Drive entrance. After turning left onto Campus Drive , make an immediate right-hand turn onto Paint Branch Drive. Go straight, and at the second stop sign make a left and then an immediate right into the visitor parking area. After exiting your vehicle, enter the Kim Engineering Building (immediately before the visitor parking lot on Paint Branch Drive). Events are typically held in the first-floor rotunda, boardrooms and lecture hall. The Dean's Office is immediately across from the elevator on the third floor.

Web sites for major airports in the Washington Metropolitan area:

 

Kim Parking Map

 

 

 

Kim Parking Map